ASI 645210A-00 | American Specialties Piatto Paper Towel Dispenser, Automatic Roll, White, Battery Operated

Availability:In stock

Our Price:$697.05 697.05

Manufacturer: American Specialties

Mfg Part #: 645210A-00

Availability: Usually Ships in 20 Business Days

 

 

Piatto Collection - Recessed mounted white automatic battery operated roll paper towel dispenser. Dispenses paper towels from one 8 inch diameter x 8 inch wide standard towel roll up to 800 feet long.

 

Product Code: ASI-645210A-00

Qty

ASI 645210A-00 - American Specialties, Inc. - Piatto Completely Recessed Automatic Roll Paper Towel Dispenser, Battery Operated, White Phenolic Door

The ASI 645210A-00 by American Specialties is a Piatto™ Collection Paper Towel Dispenser with a white phenolic door and concealed hardware. The unit is designed to be completely recessed into the plane of the washroom wall. Proximity sensing no-touch unit dispenses an owner-adjustable length per cycle.

  • Paper Towel Dispenser: Holds and dispense one 8 inch diameter x 8 inch wide standard towel roll up to 800 feet long and one 8 inch wide stub roll up to 4 inch diameter and will automatically change over to main roll when finished with stub roll when feed tabs are properly engaged.
  • Automatic Touchless Roll Towel Dispenser shall be powered by four D-size batteries (not supplied) and shall operate automatically to activate towel dispensing when hands are placed in sensor zone.
  • At each activation unit shall feed out a length of towel selected by owner by setting length, delay and paper saver switches.
  • Unit shall have an internal towel cut-off bar.
  • Towel dispensing opening shall have a fully deburred edge for snag free dispensing and user safety.
  • Frame and cabinet shall be 20 gage type 304 alloy 18-8 stainless steel and shall have no exposed fastening devices.
  • Flush face door shall be 1/2 inch thick black edged Phenolic with white outer and inner surfaces.
  • Door shall be attached to the side of cabinet with four zero-clearance concealed cabinet hinges and shall be held closed with a spring-pin L-latch.
  • Structural assembly of all components shall be of welded construction.
  • Installation set-back gage and depth stops shall be provided.
  • Manufacturer Model #:10-645210A-00.

 


 

Schematic