ASI 0195 Hand Dryer by American Specialties

The ASI 0195 by American Specialties is a Surface Mounted Hand Dryer shall operate automatically from IR sensor that shall activate dryer when hands are placed in sensorzone. Motor and heating element shall have internal resetting automatic thermal protection. Cover shall be fabricated of one-piece, heavy-duty cast iron 1/4" thick, and shall have all exposed surfaces finished with acid, chip and scratch resistant porcelain enamel. Fixed directional air vanes shall be heavy duty, rust proof and tamper resistant. Air intake slots shall not allow access to internal parts. Back plate shall be furnished with vibration isolating mounting bushings. Circuitry shall have self-adjusting time-out and fail-safe off protection controlled by a microprocessor that shall detect and reject false signals and shall automatically self calibrate to provide uniform sensitivity over its entire life span. Entire unit shall be internally electrically grounded. Dryer unit shall have approval and be listed under the re-examination services of Underwriters Laboratories, Inc. Unit shall be warranted against defects in materials or workmanship for Ten (10) years. Manufacturer Model #:10-0195.

Technical Data Sheet (Click on the link below.)

ASI 0195 Technical Data Sheet (PDF)

• Surface mount unit on wall with four (4) 1/4" screws, washers and bushings (supplied) through rubber grommets (supplied) in a corrosion protected formed heavy steel back plate into suitable prepared mountings (by others) or other suitable mounting hardware (by others) to suit wall conditions. For masonry walls use expansion bolts or anchors for 1/4" screws.
• Electrical service is supplied and connected (by others) prior to installing cover.
• Cover is secured to back plate with two hex socket security screws (supplied).

• User activates dryer by placing hands under sensor.
• Dryer automatically shuts off after time-out when user removes hands from sensor zone.