ASI 04813 - Toilet Paper Dispenser adn Napkin Disposal (Dual Access) - Partition Mounted
Partition Mounted Dual Access Toilet Paper Dispenser and Sanitary Disposal shall hold and dispense four rolls standard or 1800 sheet 4-1/2 inches x 5-1/4 inches diameter toilet paper. Removable waste container shall have a waste capacity of 1.3 gallon. Waste disposal door and toilet paper dispenser door shall be fabricated of 18 gauge type 304 stainless steel alloy 18-8. Face frame and cabinet shall be 22 gauge. All exposed surfaces shall have No. 4 satin finish and be protected by PVC film easily removed after installation. Disposal doors shall be hung on spring-tensioned hinges and shall have international graphic waste disposal symbols. Cabinet door shall be attached to cabinet at side with a full-length 3/16 inch diameter stainless steel multi-staked piano hinge and shall be held closed with a tumbler lock keyed alike to other ASI washroom equipment. Face trims shall be 1 inch wide formed from one piece with no miters, welding or open seams and have 1/4 inch square returns to face of partition. Structural assembly of all components shall be of welded construction. Internal baffles shall prevent line of sight view from either side through unit at any time. Cabinet shall include theft and vandal resistant rollers that shall be of molded high-impact resistant plastic with integral molded-in stainless steel endpins and four rollers(part number R-004) shall be supplied.