Recessed Roll Paper Towel Dispenser and Waste Receptacle shall hold and dispense one 8 inch diameter x 8 inches or 9 inches wide standard towel roll up to 800 feet long and one stub roll up to 4 inch diameter and shall have a waste capacity of 12 gallons. A lever operated dispensing mechanism shall be supplied. Cabinet, frame and waste container shall be fabricated of 22 gauge type 304 stainless steel alloy 18-8. Towel dispenser door and unit back plate for mechanism shall be fabricated of same grade 18 gauge. All exposed surfaces shall have satin finish protected by PVC film easily removed after installation. Towel dispensing slot shall be smooth and burr-free for snag-free dispensing and user safety. Door shall be attached to cabinet at side with a full-length 3/16 inch diameter stainless steel multi-staked piano hinge and be held closed with a tumbler lock keyed alike to other ASI washroom equipment. Waste container shall have hemmed edges for safety and shall be retained by a tumbler lock keyed alike to other ASI washroom equipment. Face trim shall be 1 inch wide formed from one piece with no miters, welding or open seams and have 1/4 inch square returns to wall. Structural assembly of all components shall be of welded construction. Cabinet shall have no exposed fastening devices or spot-welded seams
