ASI 0144 | American Specialties White Hand Dryer, Sensor, Heavy-Duty Cast Aluminum - 208-240 Volt

Availability:In stock

Our Price:$314.40 314.40

Manufacturer: American Specialties

Mfg Part #: 10-0144

Availability: Usually Ships in 2 to 4 Business Days



Quick Drying - Under 30 Seconds * No Touch - Energy Efficient Operation * Dries Both Hand and Face * Color: White * 208-240 Volts


Product Code: ASI-0144


ASI 0144 - Surface Mounted Sensor White Hand Dryer - Heavy-Duty Cast Aluminum, 208-240 Volt


The ASI 0144 by American Specialties is a Surface Mounted Automatic Hand and Face Dryer shall operate automatically from IR sensor that shall activate dryer when hands are placed in sensor zone. Motor and heating element shall have internal resetting automatic thermal protection. Cover shall be fabricated of one-piece, heavy-duty cast aluminum 7/64 inch thick, and shall have all exposed surfaces finished with acid, chip and scratch resistant epoxy enamel. Chrome plated flip nozzle shall be heavy duty, rust proof and tamper resistant. Back plate shall be a heavy duty, formed corrosion protected steel plate. Air intake and nozzle shall not allow access to internal parts. Circuitry shall have fail-safe off protection to prevent hold-on. Circuitry shall have a preset start-up delay to eliminate false triggers such as close proximity of passers-by and also a preset delay from last trigger to provide continuous drying time as hands are moved in and out of sensor zone. Sensor shall have an adjustable triggering distance. Entire unit shall be internally electrically grounded. Dryer unit shall have approval and be listed under the re-examination services of Underwriters Laboratories, Inc. Unit shall be warranted against defects in materials or workmanship for ten years. Owner's Manual shall be provided with unit in carton. Manufacturer Model #:10-0144.






Technical Data Sheet (Click on the link below.)

ASI 0144 Technical Data Sheet (PDF)




  • Surface mount unit on wall with four Number 10 x 1" pan head self-threading screws (provided) through holes provided in back plate. For masonry walls use expansion bolts or anchors for number 10 x 1" pan head self-threading screws.
  • Electrical service is supplied and connected (by others) prior to installing cover.
  • Cover is secured to back plate with two tamper-resistant lock screws (supplied) using key wrench provided.



  • Activate dryer by placing hands under sensor.
  • Dryer automatically shuts off after time-out when user removes hands from sensor zone.
  • User manually tilts flip nozzle for face drying and holds it in position.
  • Nozzle automatically returns to hand position when unit turns off.