ASI 0515 - American Specialties, Inc. - Turntable Specimen Pass Box
Specimen Turntable Pass Box shall receive objects up to 5-7/8 inches wide x 10-7/16 inches high x 10 inches deep and shall rotate 360 degrees between catch stops in either direction. Turntable shall be a fully enclosed compartment with only its 6 inches x 10-1/2 inches pass door open and shall be track mounted with ball bearing rotation mechanism at top and bottom. Turntable retaining door shall be hung on side with a 3/16 inch diameter stainless steel multi-staked piano hinge and shall be held closed with a tumbler lock keyed alike to other ASI washroom equipment. Unit shall be fabricated of alloy 18-8 stainless steel, type 304 (frame shall be 18 gauge; trim shall be 22 gauge) and all exposed surfaces shall have No. 4 satin finish and be protected during shipment with a PVC film easily removable after installation. Trim shall adjust for wall thickness of 3-3/8 inches minimum to 7 inches maximum and shall be of one-piece construction with no miters or welding 1 inch wide and returning 1/4 inch to finished wall.
