ASI 94696A Paper Towel Dispenser and Waste Receptacle by American Specialties

Recessed Automatic Roll Paper Towel Dispenser and Waste Receptacle shall hold and dispense one 8 inch diameter x 8 inch wide standard towel roll up to 800 feet long and one 8 inch wide stub roll up to 4 inch diameter and shall have a waste capacity of 10 gallons. An automatically operated dispensing mechanism shall be supplied. Dispenser shall be powered by four D-size batteries (not supplied) and shall operate automatically to activate towel dispensing when hands are placed in sensor zone. Unit shall feed out a 12 inches length of paper towel during each activation and shall have an internal tear-off bar for towel pull out. Towel dispensing opening shall have a fully deburred edge for snag free dispensing and user safety. Full-face door, cabinet, dispenser and waste receptacle shall be fabricated of type 304 stainless steel alloy 18-8. All exposed surfaces shall have a No. 4 satin finish and shall be protected during shipment with PVC film easily removable after installation. Cabinet and frame shall be fabricated of 20 gauge type 304 stainless steel alloy 18-8 with 1 inch wide perimeter trim to lay flat against wall. Full-face door shall be 16 gauge and shall be free of miters, welding or open seams with 3/4 inch radiused vertical edges and 15/16 inch square horizontal returns to wall. Door shall be attached to the edge of unit with a concealed full length 3/16 inch diameter heavy duty stainless steel multi-staked piano hinge and shall be held closed with two flush rimless tumbler locks keyed alike to other ASI washroom equipment. Unit back plate for mechanism shall be fabricated of 18 gauge. Interior waste receptacle shall be fabricated of stainless steel and shall have a welded on finger pull for ease of service removal and maintenance safety. Structural assembly of all components shall be of welded construction.