ASI 64696A-41 | American Specialties Piatto Automatic Roll Paper Towel Dispenser and Waste Receptacle, Matte Black, Battery Powered

Availability:In stock

Our Price:$935.77 935.77

Manufacturer: American Specialties

Mfg Part #: 10-64696A-41

Availability: Usually Ships in 25 Business Days

 

 

This unit comes with a matte black phenolic door and concealed hardware. Battery powered.

 

Product Code: ASI-64696A-41

Qty

ASI 64696A-41 - American Specialties, Inc. - Piatto Automatic Roll Paper Towel Dispenser and Waste Receptacle, Matte Black, Battery Powered

The ASI 64696A-41 by American Specialties is a Piatto Automatic Roll Paper Towel Dispenser and Waste Receptacle with a matte black phenolic door. Concealed hardware allows the unit to be completely recessed into the wall. No-touch unit dispenses a pre-set length per cycle from 8" wide, 800 ft. long rolls. Includes 9.9 gal. stainless steel waste receptacle. Battery powered.

  • Piatto Collection Automatic Paper Towel Dispenser and Waste Receptacle shall hold and dispense one 8" diameter x 8" wide standard towel roll up to 800 ft. long and one 8" wide stub roll up to 4" diameter and shall automatically change over to main roll when finished with stub roll when feed tabs are properly engaged.
  • Waste receptacle shall have a capacity of 9.9 gallons.
  • Automatic Touchless Roll Towel Dispenser shall be powered by four (4) D-size batteries (not supplied) and shall operate automatically to activate towel dispensing when hands are placed in sensor zone.
  • At each activation unit shall feed out a length of towel selected by owner by setting length, delay and paper saver switches.
  • Unit shall have an internal towel cut-off bar.
  • Towel dispensing opening shall have a fully deburred edge for snag free dispensing and user safety.
  • Frame and cabinet shall be 20 gage type 304 alloy 18-8 stainless steel and shall have no exposed fastening devices.
  • Flush face door shall be 1/2 inch thick black edged Phenolic with matte black outer and inner surfaces.
  • Door shall be attached to the side of cabinet with four (4) zero-clearance concealed cabinet hinges and shall be held closed with a spring-pin L-latch.
  • Structural assembly of all components shall be of welded construction.
  • Installation set-back gage and depth stops shall be provided.
  • Manufacturer Model #:10-64696A-41.

 


 

Schematic